Our Ancestors Irreparably Damaged the Timna Valley Environment 3000 Years Ago

Humans destroying ecosystems apparently dates as far back as to biblical times: Researchers from Tel Aviv University collected samples of charcoal used as fuel for metallurgical furnaces in the Timna Valley, located in Israel’s southern desert region, during the 11th-9th centuries BCE and examined them under a microscope. They found that the charcoal fuels used changed over time. The earlier samples contained mainly local white broom and acacia thorn trees, excellent fuel available nearby, but the quality of the firewood had deteriorated over time, with later samples consisting of low-quality wood fuel and timber imported from afar.

The researchers: "Our findings indicate that the ancient copper industry at Timna was not managed in a sustainable manner, with overexploitation of local vegetation eventually leading to the disappearance of both the plants and the industry. Copper production was not renewed in this region until about a thousand years later, and the local environment has not recovered fully to this day."

"We can only assume that [King] David took an interest in this remote desert region because of its copper – an important and valuable metal at the time, used for making bronze among other purposes."

Why Burn so Many Trees?

The study was conducted by PhD student Mark Cavanagh, Prof. Erez Ben-Yosef, and Dr. Dafna Langgut, head of the Laboratory of Archaeobotany and Ancient Environments, all from TAU's Jacob M. Alkow Department of Archaeology and Ancient Near Eastern Cultures, and Dr. Langgut is also affiliated with the Steinhardt Museum of Natural History. The study was published in the prestigious journal Scientific Reports from the Nature portfolio.

"Many findings in the Timna Valley indicate that a vast copper industry flourished here for a period of about 250 years, between the 11th and 9th centuries BCE, with thousands of mining sites, and about 10 processing sites that used furnaces to extricate copper from the ore," says Prof. Erez Ben-Yosef, director of the archaeological excavations in the Timna Valley. "This impressive operation is known to the public as 'King Solomon's Mines', and today we know that copper production peaked here at about the time of Kings David and Solomon."

"The Bible never mentions the mines as such, but it does tell us that David conquered the area of Timna, known at the time as Edom, placing garrisons throughout the land, so that the Edomites became his subjects; and that his son Solomon used huge quantities of copper for building the Temple in Jerusalem. We can only assume that David took an interest in this remote desert region because of its copper – an important and valuable metal at the time, used for making bronze among other purposes. The Timna copper industry was run by the local Edomites, who specialized in this profession, and copper from Timna was exported to distant lands, including Egypt, Lebanon, and even Greece. This study shows, however, that the industry was not sustainable, a fact that may fit in well with occupation by a foreign power, perhaps ruled from Jerusalem."

Investigating a pile of industrial waste mixed with charcoal on Slaves’ Hill, Timna Valley (photo: Erez Ben-Yosef and the Central Timna Valley Project)

The researchers explain that Timna's copper industry was highly advanced for its time, and that the metalsmiths who processed the copper were skilled and well-respected individuals.

The copper was extracted from the ore via smelting in earthenware furnaces at a temperature of 1,200 degrees Celsius. The entire process took about eight hours, after which the furnace was smashed, and the copper retrieved from its base. The wood charcoal required to attain the high temperature was manufactured beforehand at special sites, by slow combustion of trees and bushes cut down for this purpose.

Where did the Firewood Come From?

Ever since the copper industry at Timna was first discovered, about 200 years ago, researchers have repeatedly asked what fuel was used to heat the smelting furnaces. Since vegetation is very sparse in this desert area, where did the firewood come from?

"In order to finally solve this mystery, we collected samples of charcoal from the smelting sites and examined them in the lab," says Mark Cavanagh. The charcoal samples, well-preserved thanks to the dry desert climate, were taken from mounds of industrial waste at two large production sites in the Timna Valley and brought to the archaeobotanical laboratory at TAU.

"At the lab we examine plant remains discovered at archeological excavations," explains Dr. Dafna Langgut. "In the present study we examined more than 1,000 charcoal samples under an electronic microscope. The anatomic structure of the original wood is preserved in the charcoal, and under the microscope the species can be identified. The samples were dated according to the layer of the waste mound in which they had been found, and some were also sent out for carbon-14 dating."

"The production site called the 'Slaves’ Hill' (…) burned as many as 400 acacias and 1,800 brooms every year. As these resources dwindled, the industry looked for other solutions, as evidenced by the changing composition of the charcoal."

Excavating Slaves’ Hill (photo: Hai Ashkenazi, courtesy of the Central Timna Valley Project)

Mark Cavanagh describes the findings: "We found significant changes in the composition of the charcoal as time went on. Charcoal from the bottom layer of the mounds, dated to the 11th century BCE, mostly contained two plants known to be excellent burning materials: 40% acacia thorn trees, and 40% local white broom, including broom roots. The 'burning coals of the broom tree' are even mentioned in the Bible as excellent firewood (Psalm 120, 4). About 100 years later, around the middle of the 10th century BCE, we saw a change in the makeup of the charcoal. The industry had begun to use fuel of a lower quality, such as various desert bushes and palm trees. In this latter stage, other trees were imported from far away, such as junipers from the Edomite plateau in present-day Jordan, covering distances of up to 100 km from Timna, and terebinth, also transported from dozens of kilometers away."

Lasting Damage

The researchers claim that the gradual change in the contents of the charcoal resulted from overexploitation that had destroyed the natural resources – in this case high-quality firewood, the acacia and white broom.

Prof. Ben-Yosef: "Based on the amount of industrial waste found at the processing sites we can calculate the quantity of woody plants required for producing copper. For example, the production site called the 'Slaves’ Hill', which was only one of several sites operating simultaneously, burned as many as 400 acacias and 1,800 brooms every year. As these resources dwindled, the industry looked for other solutions, as evidenced by the changing composition of the charcoal. However, transporting woody plants from afar did not prove cost-effective for the long run, and eventually, during the 9th century BCE, all production sites were shut down. The copper industry in the Timna Valley was renewed only 1,000 later, by the Nabateans."

Dr. Langgut concludes: "Our study indicates that 3,000 years ago humans caused severe environmental damage in the Timna Valley, which affects the area to this day. The damage was caused through overexploitation, especially of the acacia and white broom, which, as key species in the ecosystem of the Southern Arava, had supported many other species, stored water, and stabilized the soil. Their disappearance generated a domino effect of environmental damage, irreparably harming the entire area. Three thousand years later, the local environment still hasn't recovered from the crisis. Some species, like the white broom, once prevalent in the Timna Valley, are now very rare, and others have disappeared forever."

Tel Aviv University's Dr. Dafna Langgut and Prof. Erez Ben-Yosef